Roland FP-5 - Manual (Page 37)

37
Chapter 2 Playing Along with Rhythms
Storing Settings (Setup)
You can save favorite combinations of Tone settings, settings for dual and
split play, Session Partner settings, and the like as a “Setup.”
Once saved in this way, you can instantaneously switch the instrument to
the desired group of settings simply by calling up the Setup.
You can store up to 7 different Programs.
The recommended settings were stored in the instrument when it shipped
from the factory.
fig.02-15
1.
Hold down the [Setup] button and press the ether Tone
button.
The pressed Tone button and the display flash, and the current settings are
stored.
■ Selecting Stored Settings
1.
Press the [Setup] buttons.
The Tone button’s indicator flashes in green.
2.
Press the Tone button to which the settings you want to call
up have been stored.
Only the indicator on the selected button flashes in green.
The Setup contains stored
and unstored settings.
Refer to “Settings Stored in
the Setup” (p. 71).
1
FP-5_e.book 37 ページ ２００５年１月２６日 水曜日 午前１０時２２分