Roland FP-5 - Manual (Page 24)

24
Chapter 1 Playing the Keyboard
Adding a Variety Effects to the Sound
In addition to reverb, you can apply a variety of changes to the FP-5’s
sounds.
These are referred to as “effects.” With the FP-5, you can select from ten
different effect types.
With the factory default settings, effects have been preselected for each tone.
fig.01-19
1.
Press the [Effects] button, getting its indicator to light.
Try fingering the keyboard.
The effect is applied to the currently selected tone.
2.
The remove the effect, press the [Effects] button once more,
extinguishing the indicator.
■
Changing the Effect type
1.
Press the [Effects] button, getting its indicator to light.
The effect is applied to the currently selected tone.
2.
Press the [Variation/Effects] button, getting its indicator to
light in orange.
The effect number appears in the display.
fig.01-22
NOTE
Effects may not be applied
with some of sounds.
1,2
Some tones initially have
effect applied. Selecting
such a tone makes the
[Effects] button’s indicator
light up automatically.
You can specify which part
is to have priority when the
effects assigned to the
Upper Tone and Lower
Tone differ. Refer to
“Setting the Part to Which
Effects Are Added” (p. 44).
FP-5_e.book 24 ページ ２００５年１月２６日 水曜日 午前１０時２２分