Pedal shift)” (p. 52), P. 52 – Roland FP-5 User Manual

Page 52

Advertising
background image

52

Chapter 4 Other Functions

Transferring the Program Change
message

When a setup is switched, a Program Change message is

transmitted.

1.

Switch to Function mode, and press the [Setup]
button.

2.

Hold down the [Setup] button, and press the [-] or
[+] button to select bank select MSB, LSB or
Program change (PC).

fig.disp—-

3.

Press [-] or [+] button to select the number.

4.

Exit Function mode to register the setup to the
settings (p. 37).

Using the Pedal to Switch Setup
(Pedal shift)

You can use the pedal which is connected to the

sostenuto(FC1) jack or the soft(FC2) jack as a dedicated

switch for selecting Setup in order.

1.

Switch to Function mode, and press the [Setup]
button.

2.

Hold down the [Setup] button, and press the [-] or
[+] button so “SFt” is displayed.

fig.disp—-

3.

Press the [-] or [+] button to select pedal setting.

Transferring the FP-5’s Settings to an
External MIDI Device (Bulk Dump)

You can transfer the contents of FP-5’s Setup settings to an

external MIDI device. This operation is called “bulk dump.”

1.

Use a MIDI cable (optional) to connect the FP-5’s
MIDI OUT connector to the MIDI IN connector
on an external sequencer, or use a USB cable to
connect the computer.

2.

Switch to Function mode, and press the [Setup]
button.

3.

Hold down the [Setup] button, and press the [-] or
[+] button to select bank select.

“dnP” is displayed, and the [Play/Stop] button’s

indicator begin flashes.

fig.disp—-

4.

Put the external sequencer in record mode.

5.

Press [Play/Stop] to transmit the settings.

After the transmitting is finished, “dnP” is appeared in

display.

6.

Stop the external sequencer.

flashes in red

flashes in red

Indication

description

OFF

You can use a function assigned to the

sostenuto(FC1) pedal and the soft(FC2)

pedal.

FC1

The sostenuto(FC1) pedal is dedicated

to switching Setup. The function

assigned to the sostenuto(FC1) pedal

cannot to be used.

FC2

The soft(FC2) pedal is dedicated to

switching Setup. The function assigned

to the soft(FC2) pedal cannot to be used.

flashes in red

flashes in red

FP-5_e.book 52 ページ 2005年1月26日 水曜日 午前10時22分

Advertising