Roland FP-5 - Manual (Page 42)

42
Chapter 4 Other Functions
You can make a variety of performance- and recording-
related settings in “Function Mode.”
How to make settings
1. Hold down the [Variation/Effects] button, and
press the [Tempo/rhythm] button.
“Fnc” appears in the display, and the FP-5 switches to
Function Mode.
The [Variation/Effects] and [Tempo/Rhythm] buttons
flash in green, and the indicators for the button to which
the function is assigned flash in red.
fig.04-01
2. Press one of the flashing buttons.
The flashing button’s indicator other than the pressed
button go out.
Each value is displayed.
While pressing the button, function name is displayed.
3. Press the [-] or [+] button or play a key on the
keyboard to set.
4. Press the [Variation/Effects] or [Tempo/Rhythm]
button to exit Function Mode.
The button’s indicator will return to the previous state.
1
Button Function Page
[Pedal Con-
trol]
Works of the pedal control p. 44
[Setup]
Bulk Dump, Pedal Shift,
Transferring the program
change
p. 52
[Split] Octave shift p. 44
[Transpose] Temperament p. 45
[Reverb] Velocity p. 45
[Effects]
Setting the part to which effects
are added
p. 44
[Piano] Master Tuning p. 45
[E. Piano]
How the soft pedal(FC2)
effects are applied
p. 43
[Organ]
How the sostenuto pedal(FC1)
effects are applied
p. 43
[Guitar/Bass]
How the damper pedal effects
are applied
p. 43
[Strings/Pad] Soft pedal(FC2)s work p. 43
[Voice/GM2] Sostenuto pedal(FC1)s work p. 43
[Tone Wheel] Set USB driver p. 53
[
Metronome]
Metronome beat pattern p. 46
[Start/Stop]
Setting the Intro and Ending on
or off
p. 47
[Bass]
Root note of the chord progres-
sion
p. 47
[Chord] Chord display p. 47
[Chord
Progression]
Fixing a set chord progression p. 47
[Play/Stop] MIDI Out mode p. 51
[Rec] MIDI send channel settings p. 50
[Song] Local Control p. 50
FP-5_e.book 42 ページ ２００５年１月２６日 水曜日 午前１０時２２分