Works of the soft pedal(fc2), Works of the sostenuto pedal(fc1), Changing the work of the pedal control – Roland FP-5 User Manual

Page 44: Setting the part to which effects are added, P. 44

Advertising
background image

44

Chapter 4 Other Functions

Works of the Soft Pedal(FC2)

When the instrument is turned on, this is set to function as a

soft pedal.

1.

Switch to Function mode, and press the
[Strings/Pad] button.

fig.04-02

2.

Press the [-] or [+] button to select the pedal
function.

Works of the Sostenuto
Pedal(FC1)

When the instrument is turned on, this is set to function as a

sostenuto pedal.

1.

Switch to Function mode, and press the
[Voice/GM2] button.

2.

Press the [-] or [+] button to select the pedal
function.

Changing the Work of the

Pedal Control

Connecting the included pedal to the Damper jack allows

you to use pedal to alter the sounds’ pitches, when you press

the [Pedal Control] button to light up.

It can also be set to function as an another works.

1.

Switch to Function mode, and press the
[Pedal Control] button.

fig.04-04

2.

Press the [-] or [+] button to select the pedal
function.

* The function may not work properly if a pedal other than the

supplied pedal or expression pedal is used.

* Be sure to switch off the power to the unit before attempting to

disconnect or connect a pedal cord.

Setting the Part to Which

Effects Are Added

This specifies which part is to have priority when the effects

assigned to the Upper Tone and Lower Tone differ in Dual

Play or Split Play.

1.

Switch to Function mode, and press the [Effects]
button.

fig.04-04

2.

Press the [-] or [+] button to select Upper or
Lower.

If same effects are assigned to the Upper Tone and Lower Tone,
the same effects are added to both of Tones.

Changing the Pitch of the
Lower Tone in Octave Steps

(Octave Shift)

You can change the pitch of the Lower Tone in Dual Play

(p. 18) and Split Play (p. 19) an octave at a time.

Altering the pitch in one-octave units in this way is called

“Octave Shift.”

For example, you can raise the pitch of the Lower Tone to the

same pitch of the Upper Tone in Split Play.

1.

Switch to Function mode, and press the [Split]
button.

indication

function

description

b.uP

Bend Up

Pitch rises by pressing the pedal

b.dn

Bend Down Pitch lowers by pressing the

pedal

Mod

Modulation Vivrato is added by pressing the

pedal

flashes in red

flashes in red

indication

description

-U-

(Upper)

Effects are added to the Upper Tone.

-L-

(Lower)

Effects are added to the Lower Tone.

flashes in red

FP-5_e.book 44 ページ 2005年1月26日 水曜日 午前10時22分

Advertising