Chapter 3 recording a performance, Recording a performance, Performances (p. 38) – Roland FP-5 User Manual
Page 38
38
Chapter 3 Recording a Performance
You can easily record your performances.
You can play back a performance you have recorded to check what and how
you played, and play melodies on the keyboard along with prerecorded
accompaniment using the Rhythm.
Notes Regarding Recording
• Only one song can be recorded. With second or later recordings, the
previously recorded song is erased as the new material is recorded.
When recording a new performance, it is probably a good idea to erase
the previously recorded performance first (p. 41).
• Recorded performances are erased when the power is turned off.
Recording a Performance
This records only what you play on the keyboard, without using the Session
Partner.
fig.03-01
1.
Press the [Song] button, getting its indicator to light.
The song number appears in the display.
2.
Press the [-] button to display the “USr.”
3.
Select the Tone to be played (p. 14).
4.
If necessary, sound the metronome.
While listening the metronome, select the tempo and beat of the song (p. 29).
5.
Press the [Rec] button.
The [Rec] button’s indicator lights, the [Play/Stop] button’s indicator begins
flashing, and the FP-5 is put into recording standby.
6.
Press the [Play/Stop] button or play a key on the keyboard to
begin recording.
Press the [Play/Stop] button, and after two measures of count sound,
recording begins.
Recording starts when you start playing the keyboard (without pressing
any button). In this case, a count is not sounded.
7.
Press the [Rec] button or the [Play/Stop] button to stop
recording.
The indicators for the [Rec] and [Play/Stop] buttons are extinguished, and
recording stops.
To Record Without Erasing
the Previously Recorded
Performance...
1st Pass
2nd Pass
The first Perform-
ance is preserved
1
5
6,8
2
3
4
7
You can save recorded
songs to an external
sequencer. Refer to p. 49.
During the count-in, the
count measure is indicated
in the display as “-2” then
“-1.”
About “USr” in the
Display
When recording is stopped,
the “
” indication
changes to “
” in the
display. The “.” in the
display indicates that there
is Performance material
already recorded.
FP-5_e.book 38 ページ 2005年1月26日 水曜日 午前10時22分