Ricoh Aficio 3235C - Manual (Page 150)

Troubleshooting
138
5
HHHH
Compare the sample with the print-
ed pattern box at the bottom of the
Fuser Adjustment Sheet II. Speci-
fy which square in the box match-
es the sample.
If you specify “0”, setting is fin-
ished and the display that ap-
peared in step returns.
If you specify “-1” or “+1”, the fol-
lowing display appears.
Press [Start Printing]. An adjusted
Fuser Adjustment Sheet II is print-
ed and the display that appeared
in Step
H reappears. Keep adjust-
ing until the printed pattern looks
the same as the printed pattern,
and then specify “0”.
IIII
After making all the settings, press
the
{{{{User Tools/Counter}}}} key.
The initial display is shown.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 138 Thursday, June 2, 2005 1:57 PM