Tray paper settings – Ricoh Aficio 3235C User Manual
Page 68
User Tools (System Settings)
56
4
Output tray settings
Limitation
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ When the 2 tray Finisher or booklet finisher is installed and stapling or shift-
sorting is specified for a job, the job will be delivered to the finisher shift tray,
finisher shift tray 1 or finisher shift tray 2 regardless of the output tray specified.
❒ If you use the bypass tray as the input tray, you cannot use the finisher output
tray, left tray 1 or left tray 2 as output trays.
Tray Paper Settings
❖
❖
❖
❖ Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Paper Tray Priority: Facsimile (facsimile)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Paper Tray Priority: Printer (printer)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖
❖
❖
❖ Tray Paper Size:Tray 2–4
Select the size of the paper loaded in the paper tray.
Note
❒ Tray 1 uses A4Kpaper exclusively. You cannot specify any other paper
size.
JupiterC2_GSG_GB_F2_Pre_FM.book Page 56 Thursday, June 2, 2005 1:57 PM