Ricoh Network Data Protection Unit Type C - Manual (Page 105)

Configuration
105
F
Press the {U} or {T} key to select either [Active] or [Not Active], and then
press the {# Enter} key.
After the settings are made, about two seconds later, the screen returns to the
IEEE 1394 setting menu.
G
Set [Bidi-SCSI print] in the same way.
H
Press the {Online} key.
The initial screen appears.
I
Print a configuration page to confirm the settings made.
For details about printing the configuration page, see p.40 “Test Printing” .
SCSI print:
*Active