Ricoh Network Data Protection Unit Type C - Manual (Page 36)

Setting Up
36
Turning the Power On
Follow the procedure below to turn the power on.
❒ Be sure to connect the power plug to the socket or the wall outlet firmly.
❒ The printer power must be off when plugging in and removing the power cord.
A
Check the printer's power switch is set to Off (“b”). If it is set to On
(“a”). Turn it off.
B
Attach the power cord to the socket on the back of the printer.
C
Plug the other end of the power cord securely into the wall outlet.
• Plug and unplug the power cable with dry hands, or an electric shock
could occur.
• When you pull the plug out of the socket, grip the plug, not the cord, to avoid
damaging the cord and causing a fire or an electric shock.