Ricoh Network Data Protection Unit Type C - Manual (Page 61)

Installing Options
61
Attaching Printer Hard Disk Type 3000
❒ Before touching the printer hard disk, touch something metal to discharge any
static electricity. Static electricity can damage the printer hard disk.
❒ Do not subject the printer hard disk to physical shocks.
❒ Before using the new printer hard disk, you must make the settings in the
printer driver.
A
Check the package contains the following:
❖ Printer Hard Disk Type 3000
❖ Screw
B
Turn off the power, and then unplug the power cable.
• Do not touch the inside of the controller board compartment. Doing so may
cause a machine malfunction or a burn.