Ricoh Network Data Protection Unit Type C - Manual (Page 66)

Installing Options
66
❒ If [HD Format] is not displayed on the display, the printer hard disk is not in-
stalled properly. Repeat the procedure from step A . See p.61 “Attaching
Printer Hard Disk Type 3000” . If you still cannot install it properly, contact
your sales or service representative.
❒ To avoid malfunction, do not turn off the power while formatting the printer
hard disk.
D
Press the {# Enter} key.
The printer hard disk is formatted, and a restart message appears.
E
Turn off the power, and then turn it back on.
The printer hard disk format is completed, and now ready for use.