Ricoh Network Data Protection Unit Type C - Manual (Page 82)

Installing Options
82
Attaching IEEE 1284 Interface Board Type
A
❒ Before manipulating the 1284 interface board, touch something metal to dis-
charge static electricity. Static electricity thing damage the 1284 interface
board.
❒ Do not subject the 1284 interface board to physical shocks.
A
Check the package contains the following:
❖ IEEE 1284 Interface Board Type A
B
Turn off the power, and then unplug the power cable.
C
Loosen the two screws and remove the cover of the 1284 interface board
installation unit.
The removed cover and two screws are not used when installing the 1284 in-
terface board.
• Do not touch inside the controller board compartment. Doing so may cause
a machine malfunction or a burn.