Ricoh AFICIO CL3000DN - Manual (Page 18)

Options
14
1
Note
❒ The following is the recom-
mended combination of the
Memory Units.
DDDD
Adjust the notch of the Memory
Unit to the slot, and then insert
vertically.
EEEE
Press the Memory Unit down un-
til it clicks into place.
FFFF
Align the controller board to the
top and bottom rails, and then
push in slowly until it stops.
Note
❒ When installing other options
on the controller board, do not
close the controller board, but
go to the steps for installing the
option.
Important
❒ The printer may not work prop-
erly if the controller board is not
set properly.
GGGG
Fasten the controller board to the
printer with the two screws that
you removed in step
BBBB .
Slot
Total
memory
CN2 (back
A A A A)
CN3
(front B B B B)
64 MB None 64 MB
64 MB 64 MB 128 MB
64 MB 128 MB 192 MB
64 MB 256 MB 320 MB
128 MB 256 MB 384 MB
ZHBP110E
ZHBP120E
ZHBP070E
ZHBP010E
AresPGBOptionSetup-F_FM.book Page 14 Monday, July 29, 2002 1:12 PM