Ricoh AFICIO CL3000DN - Manual (Page 42)

Options
38
1
User Account Enhance Unit Type B
R WARNING:
R CAUTION:
Note
❒ Disposal should take place at an
authorized dealer or an appropri-
ate collection site. An IC2 lithium
battery is inside the User Account
Enhance Unit.
❒ If you dispose the unit, separate
the IC2 lithium battery from the
board, and then dispose of them
according to the local regulations.
Important
❒ Before touching the User Account
Enhance Unit, touch something
metal to discharge any static elec-
tricity. Static electricity can dam-
age the User Account Enhance
Unit.
❒ Do not subject the User Account
Enhance Unit to physical shocks.
AAAA
Check the contents of the package
for the following:
❖ ❖ ❖ ❖ User Account Enhance Unit
❖ ❖ ❖ ❖ Screw
Note
❒ The other screw supplied is not
to be used.
BBBB
Turn off the power, and then un-
plug the power cable.
CCCC
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
H to fasten the controller
board.
• Do not place the IC2 lithium
battery near or into fire, or it
will explode and cause a burn.
• The User Account Enhance
Unit installed on the controller
board has a IC2 lithium battery
which can explode if replaced
incorrectly. Replace the User
Account Enhance Unit only
with the indicated one.
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
ZHBP080E
AresPGBOptionSetup-F_FM.book Page 38 Monday, July 29, 2002 1:12 PM