Ricoh AFICIO CL3000DN - Manual (Page 30)

Options
26
1
DDDD
While holding the handle, pull
out the controller board slowly.
EEEE
Remove USB2.0 Interface Unit.
Note
❒ The removed screws will be
used in step G .
❒ Lift the end of USB2.0 Interface
Unit (
A), and then remove it
from the controller board (
B).
FFFF
Attach the 802.11b Interface Unit.
Insert the end of the 802.11b Inter-
face Unit to the opening (
A A A A), and
then push down until it clicks
(
B B B B).
Confirm that the 802.11b Interface
Unit is firmly connected to the con-
troller board.
GGGG
Fasten the 802.11b Interface Unit
on the controller board using the
screws that you removed in step
EEEE .
HHHH
Attach the antenna to the card
with the label facing down and
the uneven side of the antenna
facing up.
ZHBP020E
ZHBPB460E
ZHBP450E
1
2
ZHBP190E
1
2
ZHBP200E
AresPGBOptionSetup-F_FM.book Page 26 Monday, July 29, 2002 1:12 PM