Ricoh AFICIO CL3000DN User Manual
Page 24
Options
20
1
CCCC
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
I
to fasten the controller
board.
DDDD
While holding the handle, pull
out the controller board slowly.
EEEE
Remove USB2.0 Interface Unit.
Note
❒ The removed screws will be
used in step
G
to fasten the 1394
Interface Unit.
❒ Lift the end of USB2.0 Interface
Unit (
A), and then remove it
from the controller board (
B).
FFFF
Attach the 1394 Interface Unit to
the controller board. Insert the
end of the 1394 Interface Unit into
the opening (
A
A
A
A), and then push
down until it clicks (
B
B
B
B).
Confirm that the 1394 Interface
Unit is firmly connected to the con-
troller board.
ZHBP080E
ZHBP020E
ZHBPB460E
ZHBP450E
1
2
ZHBP050E
1
2
AresPGBOptionSetup-F_FM.book Page 20 Monday, July 29, 2002 1:12 PM