Roland SI-24 - Manual (Page 10)

10
Panel Description
Control section
fig.**
Faders
These move the on-screen faders to adjust the volume level of
the channels.
When you use the mouse to move the on-screen faders, the faders of
the SI-24 will move in tandem.
STATUS buttons
STATUS MODE
The function of [STATUS] will change according to the
selected STATUS MODE .
Pressing [STATUS] repeatedly changes the status of the
channel. The current status is shown by the color of the
button.
For details, refer to “Selecting channels”
(p. 32).
CH SELECT (Channel Select) buttons
Select the channel that will be the object of operations. The
[CH SELECT] indicator of the selected channel will light.
When used in conjunction with [SHIFT] , these will function as
phantom power switches for the INPUT jacks (XLR type).
For details, refer to “Using phantom power”
(p. 16).
PAN 1–12 knobs
Adjust the pan of the channels you selected in CH ASSIGN
(channel assign) .
When [EQ/SEND] is on (lit), these knobs control the equalizer
or bus send levels.
For details, refer to “Controlling the
equalizer” (p. 34) or “Controlling the bus send levels” (p. 35).
When [PLUG-IN] is on (lit), these knobs control plug-in
parameters.
For details, refer to “Controlling plug-ins”
(p. 35).
ON/INS (On/Insert) 1–4 buttons
● When [EQ/SEND] is on (lit)
Functions as EQ [ON] .
Switches each of the four equalizer bands on/off. When the
equalizer is on,
EQ [ON] will light.
For details, refer to “Controlling the
equalizer” (p. 34).
● When [PLUG-IN] is on (lit)
Functions as [INS] . Selects the plug-in that is to be edited.
For details, refer to “Controlling plug-ins”
(p. 35).