Roland SI-24 - Manual (Page 39)

39
Controlling Pro Tools (version 4.1 or later)
Controlling Pro Tools
Making Pro Tools settings
Use the following procedure to make settings in Pro Tools.
1. Start up Pro Tools.
2. From the Setups menu, choose Peripherals.
The Peripherals window will open.
fig.P1
2-1. Click .
2-2. In MIDI Controllers #1, set Type to “HUI.” Also set the Receive from and Send
to fields to the device corresponding to the SI-24.
2-3. Click , and communication between Pro Tools and the SI-24
will begin.
3. From the Setups menu, choose “Preferences.”
The Preferences window will open.
fig.P2
3-1. Click .
3-2. For the Numeric Keypad Mode field, choose “Classic.” (*)
2-1
2-2
3-1
3-2
* On software version 4.x of
Pro Tools, there is no setting
of “Numeric Keypad Mode.”
g.P
In some cases, the Macintosh will
frequently display an error message
stating that “Pro Tools can’t communicate
with HUI.”
In this case, exit Pro Tools, and then delete
“Pro Tools Preferences” from “Default
settings” in the “System folder.” Then
restart Pro Tools.
However, after restarting, the Peripherals
and Preference settings will have to be
made once again.