Roland SI-24 - Manual (Page 23)

23
Monitoring the SI-24’s inputs
Monitoring the SI-24’s inputs
Using the RPC-1’s direct monitoring function to
return the input sound
This allows latency-free monitoring only for the input sounds in your application
software.
1. Open the RPC-1 control panel.
2. Click the “Hardware Settings” tab.
3. ● Windows 98/ME
Uncheck “Disable audio app use of Monitor Mixer and Patchbay/Router.”
fig.M05
● Windows 2000/XP
Uncheck “Disable Control of the Monitor Mixer and Patchbay/Router by Audio
Applications.”
fig.M07
4. Make the following settings according to the application you are using.
For details, refer to the manual for your application.
● Logic RPC Pro/Logic 5 users:
Audio ➔ Audio Hardware & Drivers
Uncheck “Software Monitoring” if you are using ASIO or EASI drivers.
fig.M09
● Cubase users:
Options ➔ Audio Setup ➔ System
Check “ASIO Direct Monitor” and “Record Enable Type.”
fig.M08
This is possible only when
using ASIO or EASI drivers on
Windows.
For details on operation, refer
to the column “How to open
the RPC-1 control panel”
(p. 20).