Roland SI-24 - Manual (Page 12)

12
Panel Description
MARKER button
When [MARKER] is on (lit), [0] will function as the Marker
Request button. Markers will be registered (stored) to [1] – [9] .
For details, refer to “Registering a song
location—Marker Create” (p. 36).
SHORTCUT button
When [SHORTCUT] is on (lit), [0] – [9] will function as
command execution buttons.
For details, refer to “SHORTCUT button
operations” (p. 37).
SCREEN SET button
When [SCREEN SET] is on (lit), [0]–[9] will function as
screen set buttons.
For details, refer to “Recalling screens
registered to the numeric keys—Screen Set” (p. 37).
[0] –[9]
These are used as marker buttons, screen set buttons, shortcut
buttons, and system setting buttons.
For details, refer to the corresponding
section.
To use as marker buttons:
“Registering song locations—Marker Create” (p. 36)
To use as screen set buttons:
“Recalling screens registered to the numeric keys—Screen
Set” (p. 37)
To use as shortcut buttons:
“SHORTCUT button operations” (p. 37)
To use as system setting buttons:
“Making system settings” (p. 25–30)
Transport
These buttons operate the transport.
● STOP button
Stops playback or recording.
● PLAY indicator
This will light during playback or recording.
● PLAY button
Starts playback.
● REC (Recording) indicator
This will light during recording.
● REC (Recording) button
Starts recording.
● PAUSE button
Pauses song playback or recording.
● REW (Rewind) button
Logic RPC Pro:
Rewind the song. Press [STOP] to stop rewinding.
Pro Tools/Cubase:
While you hold down [REW] , the song will rewind.
● FF (Fast-forward) button
Logic RPC Pro:
Fast-forward the song. Press [STOP] to stop fast-
forwarding.
Pro Tools/Cubase:
While you hold down
[FF] , the song will fast-forward.
Jog dial
This moves the time location within the song.
MASTER fader
This adjusts the overall volume.
The MASTER fader always controls the RPC-1’s “R-Bus Out
1–2” fader, regardless of the
CH ASSIGN (Channel Assign)
selection.