Roland VS-2480 - Manual (Page 111)

7—Project and Drive Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 111
8. If you’re exporting to a CD-R/RW, set the Verify and CD Speed parameters:
•
Verify’s setting determines whether or not the VS-2480 double-checks the
accuracy of the data it writes on your CD. Turning Verify on is always the safest
method, though it does cause the export to take a little longer.
• CD Speed—sets the speed at which the exported data is written to the CD. Try
the MAX setting to make the EXPORT process faster. If you experience
problems, try a slower setting.
9. Set the Save As parameter to select the type of V-Studio data the VS-2480 exports.
10. Export Track determines which of the project’s tracks are exported.
11. Press F5 (OK). The VS-2480 asks if you want to save any recent changes you’ve made
to the current project before proceeding.
12. Press ENTER/YES to save any recent changes, or EXIT/NO to skip to exporting.
If you’re using a CD-RW disc that already contains data, the VS-2480 asks if you
want to erase the disk. For details on the messages that may appear, see Page 352.
13. If a project is too large to fit on the medium you’re using, the VS-2480 asks you for
additional media as needed. Insert the requested media and press ENTER/YES, or
press EXIT/NO to abort the procedure.
Drive Operations
Before proceeding with the PROJECT menu’s hard drive- and drive-related operations,
here’s some information about keeping your hard drive operating at its best.
Disk Maintenance
As with any piece of sophisticated electronic equipment, you hard drive requires a bit
of maintenance from time to time in order to perform at its very best.
When you shut down the VS-2480 correctly (Page 80)—instead of just switching it off—
you’re performing simple everyday maintenance, letting the VS-2480 properly conclude
disk operations, storing your latest work safely on the currently selected drive before
shutting down.
In addition, you’ll want to make sure your hard drive doesn’t begin to show signs of
“fragmentation,” which can slow down the VS-2480 and cause other problems.
It’s not always easy to tell if a project will fit on a Zip disk when it’s exported from the
VS-2480. You can get a very rough idea by dividing the project’s total number of tracks
by the number of tracks you’re exporting, and then dividing the project’s total size by
that number. If you’re not absolutely sure the project will fit on the disk, export it as a
song archive to be safe—if you guess wrong, the export will fail.
During a multi-CD export operation, the VS-2480 asks for each disk twice: once to label
the disk, and once to actually write data on the disk.
A reminder: each disk drive partition appears in the VS-2480’s project list as a separate
drive. As we noted in Chapter 6, when we refer to a “drive,” we mean a partition. When
we refer to an entire hard drive mechanism, we call it a “hard drive.” This distinction is
very important to remember in the following sections.
VS2480OMUS.book 111 ページ ２００６年２月７日 火曜日 午後４時１６分