How a vs-2480 hard drive organizes data, Preparing a hard drive for use, Using other v-studio drives – Roland VS-2480 User Manual

Page 86: How audio is recorded on a vs-2480 hard drive

Advertising
background image

6—Understanding the Hard Disk Recorder

86

www.rolandus.com

Roland VS-2480 Owner’s Manual

How a VS-2480 Hard Drive Organizes Data

A VS-2480 hard drive divides up its total disk space into sections called “partitions.”
Partitions help keep project data together on the hard drive. Each partition acts like a
separate virtual drive—it even looks that way on the VS-2480’s screens.

Your 30GB VS-2480 internal hard drive was divided into three approximately 10 GB
partitions at the factory. These partitions are labeled IDE:0, IDE:1 and IDE:2.

Preparing a Hard Drive for Use

Before you can use a new internal hard drive with the VS-2480, it must be prepared for
use with the VS-2480. The hard drive must be erased, formatted and divided into
partitions using the FmtDrv (for “Format Drive”) command described on Page 113.

Using Other V-Studio Drives

Hard drives formatted for other V-Studios are not compatible with the VS-2480, and a
hard drive set up for the VS-2480 can’t be used with other V-Studios.

How Audio Is Recorded on a VS-2480 Hard Drive

Each time you record audio in the VS-2480, the audio is stored as a disk file comprised
of digital data. This file is called a “take.” It includes your audio and a time-stamp of the
date and time at which the recording took place. Until you perform a project
optimization (Page 100),
the VS-2480 holds on to all of the takes you’ve recorded in a
project.

Even when you re-record a performance—”recording over” your first attempt—the
original take actually remains on your hard drive and is still available to you should you
want it. And when you edit a recording on the VS-2480, you don’t actually edit the take
itself, thanks to non-destructive, pointer-based editing, which we’ll discuss shortly.

When we refer to a “drive” in the rest of the VS-2480, we’ll be referring to a partition.
This reflects that way the VS-2480’s software views partitions, and will make disk- and
drive-related operations easier to explain and understand. When we need to refer to an
entire hard disk mechanism, we’ll call the mechanism a “hard drive.”

The internal hard drive that came with your VS-2480 was formatted and partitioned
before the demo songs were installed at the factory. It’s ready to be used as is.

Internal hard drive

VS2480OMUS.book 86 ページ 2006年2月7日 火曜日 午後4時16分

Advertising