Ricoh 3506 - Manual (Page 123)

111
5. What to Do If Something
Goes Wrong
If Your Machine Does Not Operate as You
Want
Check the following:
If you cannot correct the problem by taking the above actions, please contact
your service representative.
Condition Action
Nothing happens when
the operation switch is
turned on. Is the main power switch turned on?
→ Turn on the main power switch.
B Paper tray is empty.
Load paper.
⇒ P.115 “ B Loading Paper”.
D Toner container is al-
most empty. Or toner con-
tainer is empty.
Add toner.
⇒ P.117 “ D Changing The Toner Cartridge”.
M Doors/covers are open. Close the doors/covers.
x Misfeed occurs.
Remove misfed paper. ⇒ P.122 “ x Clearing Misfeeds”.
d The machine instructs
you to add staples. Add staples.
⇒ P.125 “d Adding Staples”.
The machine instructs you
to enter your user code. The machine is set for user code mode. Enter your user code.
⇒
P.14 “When the machine is set for user codes”.
The Energy Saver indica-
tor is on. Your machine is in Energy Saver mode.
→ Press the {Energy Saver} key. ⇒ P.52 “Energy Saver Mode”.
Misfeeds occur frequently. Is the right kind of paper in the paper tray?
→ Paper size and weight must be within the specifications for this
machine.
Is folded, wrinkled, damp, or curled paper in the paper tray?
→ Always use dry, undamaged paper.
Is the paper properly set in the paper tray?
→ Always load paper correctly.
Are there any pieces of misfed paper or other foreign objects in the
machine?
→ Make sure that the paper path is completely clear of paper and
other material after a misfeed.
Staples do not come out at
all. There are jammed staples in the stapler.
→ Remove the jammed staples. ⇒ P.127 “e Removing Jammed Sta-
ples”.
After loading a new staple cartridge, staples might not be ejected
the first few times you try to use the stapler.
E or H or L is lit.
Contact your service representative.