Ricoh 3506 - Manual (Page 26)

Basics
14
1
Starting the Machine
A
Press the operation switch to make the On indicator go on.
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (Less than 270 seconds), you can use the Auto
Start function.
⇒ P.54 “Auto Start”.
When the machine is set for user codes
A
Enter your user code using the number keys. Then press the
{{{{#}}}} key.
Note
❒ To prevent others from making copies with your user code, press the {Clear
Modes
} key and the {Clear/Stop} key simultaneously after copying.
Reference
For more about user codes
⇒ P.140 “General features”.
When the Energy Saver indicator is lit
The machine is in Energy Saver mode.
A
Press any key.
The machine will return to the ready condition.
Note
❒ The machine will also return to the ready condition when an original is set
in the document feeder, or when the platen cover or the document feeder
is opened.
Trss040n.eps