Ricoh 3506 - Manual (Page 36)

Basics
24
1
Setting Custom Sized Originals
When copying from custom sized originals, enter the original size so that copy
is well aligned.
Limitation
❒ You must set your custom sized originals on the exposure glass.
Reference
For the standard sizes the machine can detect,
⇒ P.16 “Standard Size Origi-
nals”.
Note
❒ The dimensions you can enter must be within the following ranges:
A
Select the copy paper size.
B
Press the
{{{{Menu}}}} key.
C
Make sure that the [Custom Size Orig.] is selected, then press the [Select] key.
Vertical size 50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
Horizontal size 50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
Trss222n.eps
Copy004.tif
Trss114e.eps