Ricoh 3506 - Manual (Page 127)

B Loading Paper
115
5
B Loading Paper
Reference
Regarding paper sizes that can be set,
⇒ P.159 “Mainframe”.
Note
❒ If you want to change the paper size, ⇒ P.129 “Changing Paper Size”.
Non-recommended Paper for Paper Trays
• Folded, curled, creased, or damaged paper
• Torn paper
• Perforated paper
• Paper with conductive or low electrical resistance coating such as carbon or
silver coating
• Thermal paper, art paper
• Thin paper that has low stiffness
• Damp paper
• Wavy paper
• Stapled paper
• Translucent paper
• OHP transparencies
Note
❒ Load paper with the copy side down in the paper trays. If copies are curled,
try turning the copy paper over in the tray. If there is no improvement,
change to copy paper with less curl.
❒ Correct curls in copy paper before loading.
❒ Fan copy paper to get air between the sheets before loading.
❒ When making two-sided copies, do not load paper in the paper tray to copy
on the reverse side. Use the bypass tray.
⇒ P.42 “Copying from the Bypass
Tray”.