Ricoh 3506 - Manual (Page 77)

Reduce/Enlarge
65
2
Directional Size Magnification (mm)
1.
Horizontal original size
2. Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
The suitable reproduction ratios will be automatically selected when you enter
the horizontal and vertical lengths of the original and copy image you want.
Note
❒ You can enter sizes within the following ranges:
❒ If the calculated ratio is over the maximum or under the minimum ratio, it is
corrected within the range of the ratio automatically. However, with some ra-
tios, parts of the image might not be copied or blank margins will appear on
copies.
A
Press the
{{{{Menu}}}} key.
Gcdhen2e.eps
Metric Version 1 - 999mm (in 1mm steps)
Inch Version 0.1" - 99.9" (in 0.1" steps)
Trss222n.eps