Ricoh 3506 - Manual (Page 78)

Copying
66
2
Note
❒ If you have assigned the Directional Size Magnification (mm) function to
one of the
{Favorite} keys, press it and go to step D. To assign a function to
the
{Favorite} keys, ⇒ P.147 “Set favorite keys”.
B
Press the [
↓↓↓↓Next] key until [D. Size Mag. (mm)] is displayed.
C
Select [D. Size Mag. (mm)] with the
< < < <> > > > keys, then press the [Select] key.
D
Enter the vertical original size with the number keys, then press the
> > > > or
[#] key.
Note
❒ To change the value entered:
• If you have not pressed the
> or [#] key yet, press the {Clear} key and
enter a new value.
• If you have already pressed the
> or [#] key, select [Orig.:Vert.] with the
<> key and enter the new value.
E
Enter the vertical copy paper size with the number keys, then press the
> > > >
or [#] key.
Note
❒ If you press the [OK] key after entering the vertical original and paper sizes,
the horizontal ratio will become same as the vertical ratio automatically.
Copy004.tif
Trss112e.eps
Copy229.tif
Trss114e.eps
Copy030.tif
Copy031.tif