Omega OSP SERIES - Manual (Page 25)

25
e
°C
Lock
e
°C
Lock
• When selected the required type of thermocouple press the <SEL> key to obtain the following page showing
simultaneously both the actual IR temperature and the temperature measured with the thermocouple.
e
°C
Lock
If the measuring thermocouple is not connected or is broken, the display will indicate "Tc OTC".
e
°C
Lock
If the auxiliary input is disable, the display will indicate "Tc OFF".
e
°C
Lock
9.8 Minimum, maximum, average and difference indication
" Press the <SEL> key to obtain one of the following indications showing, in the auxiliary display, respectively the
Minimum or Maximum value recorded in the interval time from the instrument switch -On- and the calculated
Difference value between the identified Maximum and Minimum values.
e
°C
Lock
e
°C
Lock
e
°C
Lock
e
°C
Lock
When positioned on the max or min function, use <ENTER> key to reset the stored value.