Omega OSP SERIES - Manual (Page 28)

28
• Press the <SEL> key to select the new configuration step or press the <Trigger> key to switch the instrument -Off-.
The new selection will be automatically memory stored.
10.4 Date & Real Time clock setting
The two following pages allow respectively date and real time updating .
• Press the <SEL> key to display the date page
e
Set
°C
Lock
• Press the <ENTER> key to enable the adjustment
• Press the <SEL> key to select the parameter to be modified (day, month, year)
• Press the <▲> or <▼> key to modify the selected parameter (blinking)
• Press the <ENTER> key to acknowledge the new setting
• Press the <SEL> key to enter the real time clock page
e
Set
°C
Lock
• Press the <ENTER> key to enable the adjustment
• Press the <SEL> key to select the parameter to be modified (hour, minute, second)
• Press the <▲> or <▼> key to modify the selected parameter
• Press the <ENTER> key to acknowledge the new setting
• Press the <SEL> key to select the new configuration step or press the <Trigger> to switch the instrument -Off-. The
new selections will be automatically memory stored.
10.5 Acquisition settings
• Press the <SEL> key until the following indication is displayed :
e
Set
°C
• Press <ENTER> for setting the acquisition mode;
• Press the <▲> or <▼> key to select the required setting: MAN, MIN, MAX or interval time for automatic acquisition ;
N OTE : MAN UAL MODE DISPLAYS THE REAL TIME TEMPERATURE VALUES AND PERMITS TO STORE THE VALUE PRESSING THE <MEM>
KEY . MAX (MIN) ACQUISITION MODE DISPLAYS ONLY THE M AXIMUM (M INIMUM ) VALUE AND PERMITS TO STORE THE VALUE
PRESSING THE <MEM> KEY .
• To change the interval time for automatic acquisition, press <SEL> to change decade and the <▲> or <▼> key to
change its value.
• Press <ENTER> to store the new acquisition mode. See Cap. 11 for appropriate data acquisition operation.