Oki FAX 5250 - Manual (Page 50)

50 OKIFAX 5250
|
recognizes the access digit you use in your PBX to get an
outside line. Refer to Dial Parameter 8, Dial Prefix
function for more information.
Refer to the “Setting Basic Features, Connecting to a
PBX” section of this handbook for instructions on
changing this setting.
Available settings are ON and OFF.
Default: OFF.
7 AUTO START
When this function is turned on, your fax machine
automatically dials as soon as you press a One Touch key
or enter an Auto Dial code—you do not have to press
Start.
Available settings are ON and OFF.
Default: ON.
8 DIAL PREFIX
If your fax machine is connected to a PBX, use this
function to specify the access digit used to obtain an
outside line from your PBX. You can enter a number with
up to four digits. When this parameter is programmed, the
fax machine recognizes the access digit when you enter a
number and automatically pauses for an outside line
before dialing the rest of the number.
Refer to the “Setting Basic Features, Connecting to a
PBX” section of this handbook for instructions on
changing this setting.
Available settings are ON and OFF.
Default: OFF.
Changing Your Dial Parameter Settings
1 Press the Select Function key.
2 Press the 9/User Program One Touch key.
3 On the numeric keypad, press 2. The display shows
2:DIAL PARAMETER.
4 Press the Yes
ᮤ key until the display shows the dial
parameter you want to change.
5 Repeatedly press the No
ᮣ key until the setting you want
appears in the display.
6 Press the Yes
ᮤ key to confirm your selection. The name
of the next dial parameter setting appears in the display.
7 Press the Select Function key to finish.