Oki FAX 5250 - Manual (Page 82)

82 OKIFAX 5250
|
5 Select a location. Refer to the instructions below.
• To broadcast to a programmed group, press the # key
on the numeric keypad, then enter the two-digit number
for the group.
OR
• To select using a One Touch key, press the One Touch
key.
• To select using an Auto Dial number, press the Auto
Dial key, then enter the two-digit Auto Dial number on
the numeric keypad.
• To select using a number dialed on the numeric keypad,
dial as you would on a normal telephone.
6 Press the Yes
ᮤ key to confirm your selection.
7 Repeat Steps 4 and 5 as often as necessary to continue
selecting locations.
8 When you are finished selecting locations, press the No
ᮣ
key at the SELECT LOCATION(S) message.
9 If you have selected multiple locations, your fax machine
asks if you want to confirm your selections with a printed
report before proceeding. If you do, press the Yes
ᮤ key.
After the report is printed, the display shows BEGIN
SCANNING? If you want to make corrections, press the
No
ᮣ key and go back to Step 4. To remove a location,
select the location in the same way, but press the No
ᮣ
key to delete it from your transmission.
10 When all of your selections are correct, press the Start
key. Your fax machine scans the documents into memory
and begins transmitting the message.