Omron ZS-MDC - Manual (Page 18)

1-4
Sec
tion 1
FEAT
UR
ES
ZS-MDC
User’s Manual
Section 1
Multi-Controller Applications
Multi-Controller Applications
●
Measurement of Workpiece Thickness at Multiple Locations
Sensor Heads can be placed so as to sandwich the workpiece and measure its thick-
ness. Logic operations can be performed not only on one location but on multiple loca-
tions to calculate the difference in the measurement result.
●
Measurement of Stepped Workpieces
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure steps in stepped workpieces.
●
Measurement of Average Workpiece Height
Logic operations can be performed on measured values obtained from multiple Sensor
Controllers to measure the average height of workpieces.