Omron ZS-MDC - Manual (Page 27)

Sect
io
n 2
INSTA
L
LATION &
CONN
ECTION
Section 2
Multi-Controller
2-3
ZS-MDC
User’s Manual
Multi-Controller
This section describes installation of the Multi-Controller and connection of the I/O cable.
Before connecting/disconnecting peripheral devices, make sure that the Multi-Controller is turned OFF.
The Multi-Controller may break down if the Multi-Controller is connected or disconnected while the
power is ON.
Attaching the ferrite core
Attach the ferrite core (provided with the Multi-Controller) to the I/O cable of the Multi-
Controller.
Ferrite core