Oki MC160n - Manual (Page 35)

35 Control Panel and Configuration Menu
REPORTING
Specify report settings by selecting REPORTING in the UTILITY menu.
Activity Report Settings OFF / ON
After every 60 transmissions/receptions, a report can
be printed to show the results of the transmissions/
receptions. Select whether the report is printed
automatically when the 60th transmission/reception
is reached.
TX Result Report Settings ON / ON(ERROR) / OFF
Select whether the report showing the result of a
transmission is printed automatically after the
transmission is finished.
„ ON: Prints the report after each transmission.
„ ON(ERROR): Prints the report after a trans-
mission only if an error occurred.
„ OFF: Does not print the report after each
transmission, even if an error has occurred.
The transmission result report is normally printed
after a broadcast transmission.
RX Result Report Settings ON / ON(ERROR) / OFF
Select whether the report showing the result of a
reception is printed automatically after the reception
is finished.
„ ON: Prints the report after each reception.
„ ON(ERROR): Prints the report after a recep-
tion only if an error occurred.
„ OFF: Does not print the report after each
reception, even if an error has occurred.