Oki MC160n - Manual (Page 50)

50 Sending Faxes
3
Specify the fax number of the recipient.
– Direct dialing: Enter the fax number of the recipient directly using the key-
pad. Press the Enter key.
Using the favorite list (including group dial destinations): Press the Address book
key, press the or key to select the number of the desired speed dial or group
dial destination, and then press the Enter key. Then, press the Enter key again.
– Using speed dial numbers: Press the Address book key 2 times, use the
keypad to type in the number of the desired speed dial destination, and
then press the Enter key. Then, press the Enter key again.
– Using group dial numbers: Press the Address book key 3 times, use the
keypad to type in the number of the desired group dial destination, and
then press the Enter key. Then, press the Enter key again.
– Using the address book: Press the Address book key 4 times, and then
use the List function or Search function to search for the desired destina-
tion. (For details, refer to “Using the List Function of the Phone Book” on
page 47 or “Using the Search Function of the Phone Book” on page 48.)
Then, press the key.
4
To add a destination, check that ADD is selected, and then press the Enter
key. Repeat step 3 until all desired destinations are specified.
– To finish specifying destinations, select FINISH, and then press the Enter
key.
– To check the specified destinations, select CHECK/EDIT. After checking
the destinations, press the Back key.
„ To delete a destination, press the or key to select the destination to be
deleted after selecting CHECK/EDIT to check the destinations, and then
press the Stop/Reset key. When a message appears, requesting confirmation
to delete the destination, select YES, and then press the Enter key to delete
the destination. After the destination is deleted, press the Back key.
"
The Address book key can be used if Can Use AddressBook is displayed.
5
Press the Start key.
The document is scanned, and then the fax is sent.
"
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
the Enter key. If this is done, all selected recipients are cleared.