Oki MC160n - Manual (Page 57)

57 Sending Faxes
5
Press the Start key to begin scanning and sending the fax.
"
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
the Enter key.
Sending a Fax to a Combination of Fax
Numbers (Chain Dial)
Multiple fax numbers can be combined to specify the recipients. This is called
“chain dialing”.
For example, if the phone number and the extension number of a recipient are
registered as different speed dial destinations, the fax number of the recipient
can be specified by combining the two numbers.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to “Adjust-
ing the Image Quality” on page 44.
3
Press the On hook key.
4
Directly type in the first number, or select it from the favorite list or speed dial
destinations.
"
Refer to “Specifying a Recipient” on page 45.
5
Directly type in the second number, or select it from the favorite list or speed
dial destinations.
6
Press the S TART key to begin scanning and sending the fax.
"
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
the Enter key.