Oki MC160n User Manual
Page 43
43
Sending Faxes
"
To change the displayed scanning area, press the or key, select the
desired scanning area. Press the Enter key again to start scanning.
10
To scan multiple pages from the original glass, check that the message
NEXT
PAGE?
appears, replace the document, and then press the Enter key. When
scanning of the document is finished, press the Start key.
The document is scanned, and then the fax is sent.
"
To stop the transmission, press the Stop/Reset key. A message appears,
requesting confirmation to cancel the setting. Select YES, and then press
the Enter key.
"
If the fax could not be sent (for example, because the line was busy), the
automatic redial function will try sending the transmission again.
If the fax could not be sent with the automatic redial function, a TX Result
Report can be printed. For details, refer to “TX RESULT REPORT” on
page 85.
"
If you want to cancel a scanned document queued for transmission or a
fax waiting to be redialed, select
CANCEL RESERV.
from the menu. For
details, refer to “Canceling a Queued Transmission” on page 58.
"
If memory is nearly full, scanning of the document is stopped and a mes-
sage appears, allowing you to select whether to start the transmission or
cancel that transmission job. If the selection is made to cancel the job, the
pages of the document that have been scanned for that job are deleted. If
the selection is made to begin the transmission, transmission begins.
After the scanned pages have been sent, scanning of the document starts
again.