Sylvania H2160SL9 - Manual (Page 104)

102 EN 102 EN
GENERAL SETTING
1
Progressive (Default : OFF)
This unit is compatible with the progressive scan system.
The feature provides you with the higher definition
images than the traditional output system does. To utilize
this feature, you must set progressive scan mode to “ON”.
1) Use [ K / L] to select “ON“, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Progressive
TV Aspect
Select Video
Progressive
ON
OFF
2) Use [
{ / B] to select “Yes“, then press [ENTER].
General Setting
Playback
Display
Video
Rcording
Clock
Channel
HDMI
Reset All
Progressive
TV Aspect
Select Video
Progressive
ON
OFF
Activating progressive scan:
Check your TV has progressive scan
and connect with component video cable.
NOTE :
If there is no picture or picture is
distorted after selecting “Yes”,
Wait about 15 seconds for auto recovery.
Activate? Yes No
3) Use [
K / L] to select “Yes“ within 15 seconds, then
press [ENTER].
Your setting will be activated.
Note
• If your TV is compatible with progressive scan (480p), you
are recommended to use the HDMI or component video
cable (commercially available) to connect this unit to the
TV. (Refer to “Method 3” on page 20 or page 21.) If not, use
the RCA video cable and set the progressive scan to “OFF”.
• If the Progressive Scan image is distorted, you can
cancel Progressive Scan by pressing and holding
[SETUP] for more than 3 seconds during HDD/DVD
playback. The “Progressive” setting will be “OFF”.
• When selecting “No” or not pressing any buttons on
the unit or remote control within 15 seconds at step 3,
progressive scan remains to be “OFF” (interlace scan).
2
TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the formats of
what you are playing back with the unit and your TV
screen (4:3 standard or 16:9 widescreen TV).
Use [
K / L] to select a desired option, then press [ENTER].
General Setting
Playback
Display
Video
Recording
Clock
Channel
HDMI
Reset All
Progressive
TV Aspect
Select Video
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on the
top and bottom of the TV screen when playing back a
wide-screen picture. Select “4:3 Pan & Scan” for a full
height picture with both sides trimmed when playing
back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
Press [STOP C] if you are playing back an HDD or a disc.
1 Press [SETUP] and use [
K / L] to
select “General Setting”, then press
[ENTER].
2 Use [
K / L] to select “Video”, then
press [ENTER].
3 Use [
K / L] to select a desired item,
then press [ENTER].
Progressive
TV Aspect
Select Video 1
2
3
Submenu will appear.
4 Refer 1 to 2 on this page and set
the selected item.
• For 3 , refer to “Connection to an External
Device“ on page 53.
5 When you finish with the setting,
press [SETUP] to exit.
Video
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
MENU/LIST
RETURN
TOP MENU
WXYZ
CLEAR
JKL MNO
DEF
ENTER
PLAY
DVD HDD DUBBING
SKIP REPLAY
VARIABLE
SKIP
BX1.3/0.8 STOP PAUSE
SKIP
DTV/TV POWER
CH
ENTER
SETUP
STOP
E2M20UD_H2160SL9_EN.indd 102 E2M20UD_H2160SL9_EN.indd 102 2008/02/20 15:34:10 2008/02/20 15:34:10