Sylvania H2160SL9 - Manual (Page 69)

67 EN 67 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
Español
SPECIAL PLAYBACK
You can play back from where you stopped playing back
the disc last.
1) During playback, press [STOP C].
The resume message will appear.
Resume ON
2) Press [PLAY B].
In a few seconds, playback will resume from the point
at which it stopped last. You can resume playback at
the same point even if you turn off the unit.
To cancel the resume playback and start playing back
the disc from the beginning, press [STOP
C] again
while the playback is stopped.
Resume Playback
Note
• For MP3/JPEG files, playback will resume from the
beginning of the file at which playback was stopped.
• For HDD, you can set a resume point per every title.
• For title in the HDD, you can also play from the
resume point by selecting “Resume Playback” at step
4 of “Playback from the Title List” on page 64.
Note
• Forward/reverse speed will be indicated with icons
as follows.
forward (approx. speed)
2x:
20x:
40x:
reverse (approx. speed)
5x:
20x:
40x:
1) During playback, press [FWD
D] or [REV E].
Every time you press [FWD D] or [REV E],
approximate speed will be changed as follows.
Fast forward or fast reverse playback across titles (for
DVD), or files (for MP3 files) is not possible.
20x normal
speed
playback
2x 20x 5x 40x 40x
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
REV
FWD
For audio CD, MP3 files, approximate speed is fixed at
8x with sound.
2) Press [PLAY B] to return to normal playback.
Fast Forward / Fast Reverse Playback
Rapid playback function is available only during
playback.
This function is available only on discs recorded in the
Dolby Digital format, and plays back in a slightly faster/
slower speed while keeping the sound output.
1) During playback, press [
Bx1.3/0.8].
B : Press [ Bx1.3/0.8] once during playback.
Plays back approximately at 0.8 times of normal
playback.
B : Press [Bx1.3/0.8] twice during playback.
Plays back approximately at 1.3 times of normal
playback.
B : Press [ Bx1.3/0.8] thrice to play back in
normal speed.
No effects.
2) Press [PLAY B] to return to normal playback.
Rapid Playback
Note
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is LPCM (2 channel) during rapid playback.
Step by Step Playback
1) During playback, press [PAUSE F].
Playback will be paused and sound will be muted.
2) Press [SKIP i ] repeatedly.
Playback will advance one frame at a time when you
press [SKIP
i ] with the sound muted.
To play back step by step backward:
Press [SKIP
j ] repeatedly.
Every time you press the button, the playback will go
backward by one frame.
• Press and hold [SKIP
j ] / [SKIP i ] to reverse/
advance continuously.
3) Press [PLAY
B] to return to normal playback.
During playback, you can skip forward or backward by
the amount of time you set in “Playback” menu. To set
the time amount, refer to “
8 Variable Skip / Replay” on
page 98.
During playback, press [VARIABLE SKIP ] if you
want to skip forward. Press [VARIABLE REPLAY ] if
you want to skip backward.
Variable Skip / Variable Replay
E2M20UD_H2160SL9_EN.indd 67 E2M20UD_H2160SL9_EN.indd 67 2008/02/20 15:33:19 2008/02/20 15:33:19