Sylvania H2160SL9 - Manual (Page 32)

30 EN 30 EN
ANALOG
5 Select the channel number to add or
delete.
• Use [CH / ] to cycle through only the
memorized channels.
• Use [
{ / B] to cycle through all the channels
including the ones not memorized.
• Use [the Number buttons] to select a channel
directly.
• When a memorized channel is selected, “Add”
is checked and highlighted as a default.
• When an unmemorized channel is selected,
“Delete” is checked and highlighted as a
default.
6 Use [
K / L] to select “Add” or
“Delete”, then press [ENTER].
Manual Preset
CH 2
Add
Delete
Your setting will be activated and it will
automatically switch to the next channel so that
you can continue adding or deleting channels.
7 Press [SETUP] to exit.
DIGITAL
5 Select the channel number to delete.
• Only the major channel is displayed in “Manual
Preset” menu. (The channel number displayed
in the parenthesis is a virtual channel number)
• Use [CH / ] to cycle through only the
memorized channels.
• You cannot use [ { / B] for the digital TV
channel selection.
• Use [the Number buttons] to select a channel
directly.
• When an unmemorized channel is selected
“Delete” is checked and highlighted as a
default.
6 Use [
K / L] to select “Delete”, then
press [ENTER]. Then select the next
channel to delete.
• If the setting is complete, press [RETURN ]
to activate “Manual Preset”.
Manual Preset
DTV 2 (CH - - - )
Add
Delete
Your setting will be activated.
WARNING:
• For the digital TV channels, you cannot recover the
deleted channels once they are deleted unless you
perform the auto channel preset again.
7 Press [SETUP] to exit.
CHANNEL SETTING
E2M20UD_H2160SL9_EN.indd 30 E2M20UD_H2160SL9_EN.indd 30 2008/02/20 15:32:34 2008/02/20 15:32:34