Sylvania H2160SL9 - Manual (Page 54)

52 EN 52 EN
TIMER RECORDING
Hints for Timer Recording
PROG. A
PROG. B
actual
recording
PROG. A PROG. B
When the starting time is the same:
A program set previously (PROG. A) has priority.
The first 2 minutes (at the longest) will be cut off.
PROG. A
The Priority of Overlapped Settings
Note for DVD recording
• When the recording time of 2 programs are overlapped, or
the end time of a program and the start time of another
program is the same, the first 2 minutes (at the longest) of
the subsequent program will be cut off.
• If the cut-off portion comes up to 3 minutes or more, this
program will be displayed with errors number E40 in the
timer programming list.
PROG. A
PROG. B
actual
recording
The first 2 minutes (at the longest) will be cut off.
PROG. B PROG. A
When the end time of the programming
currently being recorded and the start time
of the subsequent program are same:
The beginning of the PROG. B may be cut off.
• If there is a power failure or this unit has been
unplugged for more than 30 seconds, the clock setting
and all timer programming will be lost.
• When recording to a DVD, if a disc is not inserted, the
unit will perform the alternate recording to the HDD
(refer to page 50).
• When a timer recording is completed, the unit will ask
you whether to turn off the unit if there is no timer
recording which starts within 5 minutes, except under
conditions listed below.
- During playback of HDD or DVD.
- While displaying menus or information on the screen.
• The unit will be turned off automatically if you select
“Yes” or if you do not reply in 1 minute.
• When the programmed starting and ending time are
earlier than the current time, the setting will not be
accepted and be cleared for redoing.
• If the starting time is earlier and the ending time is later
than the current time, the recording will start right after
you press [ENTER] at step 8 on page 50.
• You cannot change the audio language for the timer
recording of digital TV broadcasting.
• Timer recording whose recording time exceeds 12 hours
cannot be made.
• It is prohibited to turn off the unit from 4 minutes before
the programmed starting time.
• It is prohibited to change channel from 15 seconds
before the programmed starting time.
• [REC/OTR] does not work from 2 minutes before the
programmed starting time. If it comes to 2 minutes
before the starting time during regular or one-touch
timer recording, the recording in progress will be
stopped.
• Playback of DVD/CD is prohibited from 2 minutes before
the programmed starting time when the recording
media is DVD. If it comes to 2 minutes before the
programmed starting time during DVD/CD playback, the
playback will be stopped.
• Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over
the programs with the later start time when timer programs overlap.
• When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.
• When 2 or more timer programs have the same start time, the program set first will be given priority.
• A timer recording of lower priority will be canceled or start from the middle.
• Check the overlapped timer programmings and change the priority if necessary.
E2M20UD_H2160SL9_EN.indd 52 E2M20UD_H2160SL9_EN.indd 52 2008/02/20 15:33:00 2008/02/20 15:33:00