Sylvania H2160SL9 - Manual (Page 41)

39 EN 39 EN
Disc
Management
Recording
Playback
Introduction
Connections
Basic Setup
Editing
Function Setup
Others
Español
FORMATTING A DISC
Choosing the Recording Format of a Brand-New DVD-RW
When inserting a brand-new DVD-RW, the unit automatically starts to initialize the disc. DVD-RW will be formatted
either video or VR mode according to the recording format mode setting of the unit. Before inserting a brand-new
DVD-RW, you need to set the recording format to the desired mode. You can also manually format a DVD-RW once it
has been used.
1 Press [SETUP].
2 Use [
K / L] to select “DVD Menu”,
then press [ENTER].
Setup
Timer Programming
Title List
DVD Menu
HDD Menu
General Setting
Dubbing
3 Use [
K / L] to select “Format”, then
press [ENTER].
DVD Menu
Format
Finalize
4 Use [
K / L] to select “Format Mode”,
then press [ENTER].
DVD Menu
Format
Finalize
Start
Format Mode
5 Use [
K / L] to select “Video mode” or
“VR mode”, then press [ENTER].
6 Press [SETUP] to exit.
7 Insert a brand-new disc.
Formatting will start.
Formatting 90%
8 Formatting is completed.
“100%” is indicated.
Note
• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R.
• You cannot mix two formats on one DVD-RW. If you
insert a disc that has been recorded before, the
recording format cannot be changed even if you
change it in the main menu.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
MENU/LIST
RETURN
TOP MENU
WXYZ
CLEAR
JKL MNO
DEF
ENTER
PLAY
DVD HDD DUBBING
SKIP REPLAY
VARIABLE
SKIP
BX1.3/0.8 STOP PAUSE
SKIP
REC/OTR REC MODE TIMER PROG.
DTV/TV POWER
CH
ENTER
SETUP
E2M20UD_H2160SL9_EN.indd 39 E2M20UD_H2160SL9_EN.indd 39 2008/02/20 15:32:42 2008/02/20 15:32:42