Sylvania H2160SL9 - Manual (Page 50)

48 EN 48 EN
AUTOSTART RECORDING
1 When watching TV program through
this unit’s tuner, use
[SKIP
H], [REV E] or
[VARIABLE REPLAY ] to locate your
desired point to start recording.
• If you press [DISPLAY], the autostart recording
information will appear. Refer to page 23.
2 Press [REC/OTR] to start recording.
ORG
2:59:44 / 3:31:31
10:42AM
10:10AM
7:10AM
CH 10
From the selected point, the contents of the
autostart recording become a recording title in
the HDD while the unit continues to record the
current content of the channel.
3 Press [STOP
C] twice to stop
recording.
CH 10
1/100 1/ 1
ORG
0:00:34 / 0:32:34
HDD SP 1:53
HDD
The recording stops and new autostart recording
begins.
• If you press [STOP
C] once, the image on the
TV screen goes back to current content of the
channel while the recording continues.
Every time you turn on this unit, this unit automatically
records the channel currently viewed and temporarily
stores the recorded content to the HDD (Autostart
recording). By using this function, you can pause or go
back the TV program you are currently watching, and you
can also start recording the whole TV program even at
the middle of the TV program. The temporary recording
can be made up to 6 hours of time range. If the recording
exceeds 6 hours, earliest recording will be overwritten.
OPEN/
CLOSE
INPUT
SELECT
HDMI
.@/: ABC
GHI
PQRS TUV
SETUP REPEAT
DISPLAY
AUDIO
MENU/LIST
RETURN
TOP MENU
WXYZ
CLEAR
JKL MNO
DEF
ENTER
PLAY
DVD HDD DUBBING
SKIP REPLAY
VARIABLE
SKIP
BX1.3/0.8 STOP PAUSE
SKIP
REC/OTR REC MODE TIMER PROG.
DTV/TV POWER
CH
DISPLAY
REC/OTR
SKIP
STOP
REPLAY
VARIABLE
Note
• In the autostart recording, when you display the DTV
program information, the information will be
recorded as the part of the picture.
• When you record the contents of the autostart
recording, the recording mode is always SP.
• If there is not enough recordable space on HDD to
record from the selected point to current point, you
cannot record the content of autostart recording.
• When you record the content of the autostart
recording, the recording mode will be SP.
• When you are recording the contents of the autostart
recording, if you record the part that is copy-protected,
“Copy guard detected.” appears and you are not able to
watch the part.
The autostart recording will be stopped, cleared in
following cases:
- Turning off the power
- Start recording
- Editing titles or goes into editing menu
- Deleting tiles (DVD only)
- Start dubbing
- Changing input channels
- Using any functions in “DVD Menu” or “HDD Menu”
- Selecting following menus:
“General Setting” ➔ “Display” ➔ “V-Chip” ➔ “Downloadable Rating”
“General Setting”
➔ “Channel” ➔ “Auto Preset”
“General Setting”
➔ “Channel” ➔ “Manual Preset”
• The autostart recording will automatically resume for
new recording
For how to playback the autostart recording, refer to
“Playing back the Autostart Recording” on page 70.
Recording the Contents of the Autostart Recording
E2M20UD_H2160SL9_EN.indd 48 E2M20UD_H2160SL9_EN.indd 48 2008/02/20 15:32:54 2008/02/20 15:32:54