Olympus DM 620 - Manual (Page 22)

22
1
EN
Se
tt
in
g t
im
e a
n
d d
a
te
If you set the time and date beforehand,
the information when the file is recorded is
automatically stored for each file. Setting
the time and date beforehand enables easier
file management.
When you use the recorder for
the first time after purchasing it,
or when the batteries have been
inserted without the device having
been used in a long time, the
[Set Time & Date] will appear. When
the “Hour” is flashing, conduct the
setup from Step 1.
1 Press the
9 or 0 button to
select the item to set.
• Select the item from the “Hour”,
“Minute”, “Year”, “Month” and “Day”
with a flashing point.
2 Press the + or − button to set.
• Follow the same steps by pressing the
9 or 0 button to select the next
item, and pressing the + or − button
to set.
• You can select between 12 and 24
hour display by pressing the F1
button while setting the hour and
minute.
Example: 10:38 P.M
10:38 PM
(Initial setting)
22:38
• You can select the order of the
“Month”, “Day” and “Year” by
pressing the F1 button while setting
them.
Example: March 24, 2011
3M 24D 2011Y
(Initial setting)
24D 3M 2011Y
2011Y 3M 24D
3 Press the
`OK button to
complete the setting.
Setting time and date [Time & Date]
• The clock will start from the set date
and time. Press the
`OK button
according to the time signal.
+− button
9 0 button
`OK button