Olympus DM 620 - Manual (Page 49)

49
3
EN
Erasing
Erasing
3 Press the + button to select
[Start].
Partially erasing a file
An unwanted part of a file can be erased.
1 Play the file you want to partially
erase.
• Forward a file to the position that
shall be erased. If the file is long,
use the
9 button to move to the
position you want to delete.
ERASE button
Only a PCM file recorded in the
recorder can be partially erased.
4 Press the
`OK button.
• The display changes to [Erase!] and
erasing will start.
• [Erase Done] is displayed when the
folder is erased.
• While [Erase start] is flashing,
playback continues and you can
rewind or fast-forward as usual to
locate the erase end position quickly.
If the end of the file is reached
while this indication is flashing, that
position will become the erase end
position.
3 In the position you want to end
partial erase, press the ERASE
button again.
2 In the starting position of the
partial erase, press the ERASE
button.
• [Start point] and [End point] on the
display flash alternatively.