Olympus DM 620 - Manual (Page 39)

39
3
EN
Pla
yback
Playback
Settings relating to playback
[Noise Cancel]
(
☞ P.60)
If recorded audio is difficult
to understand because of
noisy surroundings, adjust
the Noise Cancel setting
level.
[EUPHONY]
(
☞ P.60)
The EUPHONY setting can
be set to one of the 4 levels
according to your preference.
[Voice Filter]
(
☞ P.60)
The recorder has a Voice
Filter Function to cut low
and high frequency tones
during normal, fast, or slow
playback, and enable clear
audio playback.
[Play Mode]
(
☞ P.61)
You can select the playback
mode that fits your
preference.
[Skip Space]
(
☞ P.61)
The skip interval length can
be set.
[Alarm]
(
☞ P.72)
The alarm playback function
can be set to play a selected
file at a pre-set time.
[Play Scene]
(
☞ P.62)
Playback settings of your
choice can be saved to suit
different sound qualities and
playback methods.
[Reverb]
(
☞ P.62)
You can enjoy the
reverberant sound of various
space sizes such as from
the recording studio to the
dome.
Playback through earphone
An earphone can be connected to the EAR
jack of the recorder for listening.
• When the earphone is used, the recorder
speaker will be switched-off.
Notes
• To avoid irritation to the ear, insert the
earphone after turning down the volume
level.
• When you listen with the earphone
during playback, do not raise the
volume too much. It may cause hearing
impairment and decrease in hearing
ability.
To EAR jack