Olympus DM 620 - Manual (Page 74)

74
4
EN
Menu setting method
Menu setting method
• Select the folder using the + or
– buttons and press the
`OK button
to move to file selection. Use the + or
– button to select the file in the same
way.
2 Press the `OK button to exit
[Playback File] selection.
6 Press + or − button to select
[Finish].
• Programmed settings will be applied
and the display will return to the
preset number selection menu.
• To set other preset numbers, repeat
the abovementioned procedure.
• When the
9 button is pressed
in the Select in Advance Menu, the
settings selected can be confirmed.
8 Press the F2 (EXIT) button to
complete the setting.
• The [
A] will appear on the display.
When setting to [ON]
Notes
• If [Everyday] is selected, the alarm will
sound at the scheduled time every day
unless alarm playback is canceled.
• The alarm will sound for five minutes and
then stop. In such a case, even if a file is
selected for Alarm Playback, it will not be
automatically played.
• If three alarm playback have the same
starting times, [Preset 1] has the highest
priority and [Preset 3] has the lowest.
• If the recorder is in use or if operations are
being performed at the scheduled time,
the Alarm Playback function will not be
available.
• The alarm will sound at the scheduled
time even if the power is turned off or
the recorder is set to Hold mode. The
recorder begins to play the selected file
when you press any button, and stops
playing when you press the STOP (
4)
button.
• If the selected file is moved, erased or the
microSD card removed, file playback will
not be performed and only the alarm will
sound.
• If the starting times for timer recording
and alarm playback are set for the same
time, timer recording will have priority
(
☞ P.70).
• If the recorder is formatted (
☞ P.77),
alarm data will also be erased, so you
won’t be able to set an alarm. When
the data has been erased by accident,
connect to PC and copy the alarm
sound data to the recorder by using the
supplied "Olympus Sonority" (
☞ P.86).
7 Press the
`OK button to
complete the setting.