Olympus DM 620 - Manual (Page 50)

50
3
EN
Erasing
Erasing
4 Press the ERASE button.
• The display will switch to [Partial
erasing !] and start the partial
erase. The deletion is completed
when [Partial erase completed.] is
displayed.
• Playback will stop at the end location
of the partial erase.
• If you do not press the ERASE button
within 8 seconds, the partial erase
operation will be canceled and the
recorder will return to playback
mode.
Notes
• You cannot recover a file once it has been
erased. Please check carefully before
erasing.
• When an microSD card is inserted in the
recorder, be sure to confirm the recording
media as either [Built-in Memory]
or [microSD Card] so that there is no
mistake (
☞ P.64).
• The file creation date will not change
even if the file is partially erased.
• The locked files and files set as read-only
cannot be erased (
☞ P.53).
• The default folders of the recorder,
namely [Recorder] (including [Folder A]
to [Folder E]), [Music] and [Podcast]
cannot be erased.
• In the [Music] and [Podcast] folder, all
folders except [Music] and [Podcast] can
be deleted.
• If there is a file that cannot be recognized
by the recorder, the file and the folder
which contains that file will not be
erased. Please connect the recorder to
your PC to erase.
• It may take over 10 seconds to complete
processing. Never perform operations
such as the following while processing, as
they may damage the data. In addition,
replace the battery with a new one in
order to ensure that the battery will not
run out while processing.
1 Disconnecting the AC Adapter while
processing.
2 Removing the battery while
processing.
3 Remove the microSD card during
processing when [microSD Card] is
being used as the recording media.